Estimating your IPD in a mirror
You can estimate your IPD with a millimeter ruler and a mirror.
1. Stand directly in front of a mirror, and then hold the ruler up to your eyes. Make sure that
the ruler is level. If you're using a flexible ruler, make sure not to bend it.
2. Align the zero mark with the center of your pupil. You may need to close your other eye to
get a clear reading.
3. Check the millimeter mark on the other eye. You may need to close the first eye to get a
clear reading.
4. Make a note of your IPD measurement. You may want to recheck several times to make
sure your reading is accurate.
You can also ask a friend to help you measure your IPD instead of doing it by yourself with a
mirror. Make sure you're looking straight ahead while they measure.
Estimating your IPD through experimentation
You can estimate your IPD through trial and error. This method is easier than using a ruler, but it
may be less accurate.
1. From the Lobby, select Settings
General IPD (interpupillary distance).
2. Select Adjust next to Manual IPD adjustment.
27 Getting started
To Next Page
Loading...
