Enrolling the headset and setting it up for Microsoft Intune
There are two ways you can enroll your headset in Microsoft Intune.
§ Scanning a QR code
§ Creating and uploading a batch configuration package
Once you're done enrolling your headset, you can set it up.
If the headset is currently enrolled or was enrolled to an MDM solution before, perform a
factory reset first. Then set up the headset. See Resetting the headset (factory reset) on page
71 and Setting up your headset for the first time on page 23.
Enrolling your headset by scanning a QR code
1. From the Lobby, select Settings Advanced MDM setup QR code.
2. Use the onscreen QR code scanner to scan the QR code displayed on your computer
screen. Make sure the code fits just inside the scanning area and hold steady until you've
scanned the code successfully.
Uploading a Mobile Device Management (MDM) solution
The steps below that describe how to upload an MDM solution using VIVE Business+ can be
found in the VIVE Business+ User Guide. See Uploading a Mobile Device Management (MDM)
solution.
1. In VIVE Business+, click Manage files Management solution.
2. Click Add and select Microsoft Intune.
3. Under Upload MDM files, click Browse and upload the Microsoft agent APK file
associated with the device enrollment token JSON file. You can download the APK file
from the URL provided in the JSON file under
77 VIVE Focus Vision for Business
To Next Page
Loading...
