Figure 1-2 LTE Device's V
oIP Application
The LTE Device sends your call to a VoIP service provider's SIP server which forwards your
calls to either VoIP or PSTN phones. Enable the L
TE Device's SIP ALG feature to support
SIP phones and IAD devices on the LAN.
1.1.3 Wireless Connection
By default, the wireless LAN (WLAN) is enabled on the LTE Device. Once Wireless is
enabled, IEEE 802.11b/g/n/ac compliant clients can wirelessly connect to the LTE Device to
access network resources. You can set up a wireless network with WPS (WiFi Protected
Setup) or manually add a client to your wireless network.
Figure 1-3 Wireless Connection Application
1.2 The WLAN Button
You can use the WIRELESS On/Off button on top of the device to turn the 2.4 GHz and 5
GHz wireless LAN on or of
f. You can also use it to activate WPS in order to quickly set up a
wireless network with strong security.
Turn the Wireless LAN On or Off
Step 1 Make sure the PWR/SYS LED is on (not blinking).
LTE CPE B2368
User Guide
1 Introduction
Issue 03 (2019-01-31) Copyright © Huawei Technologies Co., Ltd. 2
To Next Page
Loading...
