Label Description
Security
Mode
Select Mor
e Secure (WPA(2)-PSK to add security on this wireless
network. The wireless clients which want to associate to this network must
have same wireless security settings as the L
TE Device. After you select to
use a security, additional options appears in this screen.
Or you can select No Security to allow any client to associate this network
without any data encryption or authentication.
See 5.2.1 More Secure (WPA(2)-PSK) for more details about this field.
Apply Click Apply to save your changes.
Back Click Back to exit this screen without saving.
5.4 The WPS Screen
Use this screen to configure WiFi Protected Setup (WPS) on your L
TE Device.
WPS allows you to quickly set up a wireless network with strong security, without having to
configure security settings manually. Set up each WPS connection between two devices. Both
devices must support WPS. See 5.5.5 WiFi Protected Setup (WPS) for more information
about WPS.
NOTE
The LTE Device applies the security settings of the SSID1 profile (see 5.1.2 Befor
e Y
ou Begin ). If you
want to use the WPS feature, make sure you have set the security mode of SSID1 to WPA2-PSK or No
Security. Also, do not hide SSID1.
Click Network Setting > Wireless (or Wireless 5G) > WPS. The following screen displays.
Select Enable and click Apply to activate the WPS function. Then you can configure the
WPS settings in this screen.
LTE CPE B2368
User Guide
5 Wireless
Issue 03 (2019-01-31) Copyright © Huawei Technologies Co., Ltd. 47
To Next Page
Loading...
