Label Description
Enabled This shows whether the L2TP tunnel is turned on or off.
Tunnel Name This shows the name of this tunnel.
L2TP Layer This shows the OSI layer protocol (Layer3) the L2TP tunnels over a
network.
Server IP This shows the IP address of the remote gateway with which the LTE
Device establishes the L2TP tunnel.
User Name The remote user must log into the LTE Device to use the L2TP VPN
tunnel.
This shows a user or user group that can use the L2TP VPN tunnel.
Modify Click the Edit icon to go to the screen where you can edit the L2TP
VPN tunnel.
Click the Delete icon to delete an existing tunnel.
13.2.1 The Add/Edit L2TP Tunnel Screen
Use this screen to create or modify an L2TP VPN tunnel. Click the Add New Tunnel button
or an
Edit icon next to a VPN tunnel in the Security > L2TP VPN screen to open the
following screen.
LTE CPE B2368
User Guide
13 L2TP VPN
Issue 03 (2019-01-31) Copyright © Huawei Technologies Co., Ltd. 96
To Next Page
Loading...
