Label Description
Apply Click Apply to save your changes.
Back Click Back to exit this screen without saving.
6.4 The UPnP Screen
Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP
for simple peer-to-peer network connectivity between devices. A UPnP device can
dynamically join a network, obtain an IP address, convey its capabilities and learn about other
devices on the network. In turn, a device can leave a network smoothly and automatically
when it is no longer in use.
Use the following screen to configure the UPnP settings on your LTE Device. Click Network
Setting
> Home Networking > UPnP to display the screen shown next.
Figure 6-5 Network Setting > Home Networking > UPnP
The following table describes the Labels in this screen.
Table 6-4
Network Settings > Home Networking > UPnP
Label Description
UPnP Select Enable to activate UPnP. Be aware that anyone could use a UPnP
application to open the web configurator's login screen without entering
the L
TE Device's IP address (although you must still enter the password
to access the web configurator).
Apply Click Apply to save your changes.
6.5 The UPnP List Screen
When you enable UPnP, this screen lists the UPnP-enabled devices and/or software the LTE
Device finds on your network.
Click Network Setting >
Home Networking > UPnP List to display the screen shown next.
LTE CPE B2368
User Guide
6 Home Networking
Issue 03 (2019-01-31) Copyright © Huawei Technologies Co., Ltd. 63
To Next Page
Loading...
