Label Description
Auth Protocol Select the protocol (EAP, MSCHAPv1 or MSCHAPv2) the LTE
Device uses for user authentication.
Server IP Address Enter the IP address of the remote gateway.
User Name Enter a user or user group that can use the L2TP VPN tunnel.
Password Enter the password for the user.
Apply Click this button to save your settings back to the LTE Device.
Back Click this button to return to the previous screen without saving any
changes.
13.3 The Monitor Screen
Use this screen to monitor L2TP VPN tunnel status. Click Security > L2TP VPN > Monitor
to open the following screen.
Figure 13-3
Security > L2TP VPN > Monitor
The following table describes the fields in this screen.
Table 13-3 Security > L2TP VPN > Monitor
Label Description
# This shows the index number of the rule. Select the checkbox next to the
rule to activate it.
Status This shows the status of the L2TP VPN tunnel.
Tunnel Name This shows the name of this tunnel.
Server IP This shows the IP address of the remote gateway.
L2TP Server
IP
This shows the IP address that the LTD Device assigned for the remote
user's computer to use within the L2TP VPN tunnel.
LTE CPE B2368
User Guide
13 L2TP VPN
Issue 03 (2019-01-31) Copyright © Huawei Technologies Co., Ltd. 98
To Next Page
Loading...
