Figure 13-2 Add/Edit L2TP Tunnel
The following table describes the fields in this screen.
Table 13-2
Add/Edit L2TP Tunnel
Label Description
L2TP Setup
Enabled Select this to have the LTE Device use the L2TP tunnel.
Clear it to configure the L2TP tunnel but not use it.
Tunnel Name Enter a descriptive name for the L2TP tunnel.
L2TP Protocol
Layer
Select Layer3 L2TP to have the L
TE Device tunnel OSI layer 3
protocol over a network.
Select
Layer2 L2TP to have the LTE Device tunnel OSI layer 2
protocol (BCP tunnel) over a network.
LTE CPE B2368
User Guide
13 L2TP VPN
Issue 03 (2019-01-31) Copyright © Huawei Technologies Co., Ltd. 97
To Next Page
Loading...
