Huawei B2368 - More Secure (WPA(2)-PSK)

The following table describes the Labels in this screen.
Table 5-2
Wireless > General: No Security
Label Description
Security Level Choose No Security from the sliding bar
.
5.2.1 More Secure (WPA(2)-PSK)
The WPA-PSK security mode provides both data encryption and user authentication. Using a
Pre-Shared Key (PSK), both the LTE Device and the connecting client share a common
password in order to validate the connection. This type of encryption, while robust, is not as
strong as the newer WPA2-PSK.
Click Network Setting > Wireless (or Wireless 5G) to display the General screen. Select
More Secure as the security level. Then select WPA-PSK or WPA2-PSK from the Security
Mode list.
Figure 5-5 Figure 1-1 Wireless > General: More Secure: WPA(2)-PSK
The following table describes the Labels in this screen.
Table 5-3
Wireless > General: WPA(2)-PSK
Label Description
Security Level Select Mor
e Secure to enable WPA(2)-PSK data encryption.
LTE CPE B2368
User Guide
5 Wireless
Issue 03 (2019-01-31) Copyright © Huawei Technologies Co., Ltd. 43