Label Description
Interval
Configuration
Enable
You can tap the phone's hook to signal a flash in order to control certain
functions. Select this to manually configure the flash detect interval
(how long of a press on the phone's hook the L
TE Device counts as a
flash).
If this configuration is disabled, the flash interval will be set according
to the region selected in V
oIP > Phone > Region Settings.
Hook Flash
Detect Upper
Bound
Specify the longest hook press to count as a flash. The LTE Device
interprets a hook press longer than this as hanging up.
Hook Flash
Detect Lower
Bound
Specify the shortest hook press to count as a flash.
Apply Click Apply to save your changes.
Back Click Back to return to the previous screen without saving.
15.4 The Phone Region Screen
Use this screen to maintain settings that depend on which region of the world the LTE Device
is in. T
o access this screen, click VoIP > Phone > Region.
Figure 15-5 VoIP> Phone > Region
Each field is described in the following table.
T
able 15-4
VoIP > Phone > Region
Label Description
Region
Settings
Select the place in which the LTE Device is located.
LTE CPE B2368
User Guide
15 VoIP
Issue 03 (2019-01-31) Copyright © Huawei Technologies Co., Ltd. 122
To Next Page
Loading...
