Label Description
Status This field displays whether the client is connected to the LTE Device.
Host Name This field displays the client host name.
MAC Address The MAC (Media Access Control) or Ethernet address on a LAN
(Local Area Network) is unique to your computer (six pairs of
hexadecimal notation).
A network interface card such as an Ethernet adapter has a hardwired
address that is assigned at the factory
. This address follows an industry
standard that ensures no other adapter has a similar address.
IP Address
This field displays the IP address relative to the # field listed above.
Reserve Select the check box in the heading row to automatically select all
check boxes or select the check boxes in each entry to have the LTE
Device always assign the selected entries' IP addresses to the
corresponding MAC addresses (and host names). You can select up to
128 entries in this table.
Apply Click Apply to save your changes.
Cancel Click Cancel to restore your previously saved settings.
Refresh Click Refresh to reload the DHCP table.
If you click Add new static lease in the Static DHCP screen, the following screen displays.
Figure 6-4 Static DHCP: Add
The following table describes the Labels in this screen.
Table 6-3
Static DHCP: Add
Label Description
MAC
Address
Enter the MAC address of a computer on your LAN.
IP Address Enter the IP address that you want to assign to the computer on your LAN
with the MAC address that you will also specify
.
LTE CPE B2368
User Guide
6 Home Networking
Issue 03 (2019-01-31) Copyright © Huawei Technologies Co., Ltd. 62
To Next Page
Loading...
