Huawei B2368 - Page 121

NOTE
The configuration rule has restrictions. The configuration value cannot start with a digit and end with a
number sign (#).
The following table describes the Labels in this screen.
Table 15-1
VoIP > SIP > SIP Service Provider
Label Description
General
SIP Service Provider Select this if you want the LTE Device to use this SIP provider.
Clear it if you do not want the L
TE Device to use this SIP
provider
.
SIP Service Provider
Name
Enter the name of your SIP service provider.
SIP Local Port Enter the LTE Device's listening port number, if your VoIP
service provider gave you one. Otherwise, keep the default
value.
NOTE
To let both the FXS port and the IAD devices or SIP phones on the
LAN work together, check the SIP port settings on your IADs and SIP
phones and make sure they use different ports than the LTE Device's
SIP local port.
Main SIP Server Address Enter the IP address or domain name of the SIP server
provided by your VoIP service provider. You can use up to 63
printable ASCII characters. It does not matter whether the SIP
server is a proxy, redirect or register server.
SIP Server Port Enter the SIP server's listening port number, if your VoIP
service provider gave you one. Otherwise, keep the default
value.
REGISTER Server
Address
Enter the IP address or domain name of the SIP register server,
if your VoIP service provider gave you one. Otherwise, enter
the same address you entered in the SIP Server Address field.
You can use up to 63 printable ASCII characters.
REGISTER Server Port Enter the SIP register server's listening port number, if your
VoIP service provider gave you one. Otherwise, enter the same
port number you entered in the SIP Server Port field.
LTE CPE B2368
User Guide
15 VoIP
Issue 03 (2019-01-31) Copyright © Huawei Technologies Co., Ltd. 113