European Call Transfer
Do the following to transfer a call (that you have answered) to another phone number.
Step 1 Press the flash key to put the caller on hold.
Step 2 When you hear the dial tone, dial "*98#" followed by the number to which you want to
transfer the call.
Step 3 After you hear the ring signal or the second party answers it, hang up the phone.
----End
European Three-Way Conference
Use the following steps to make three-way conference calls.
Step 1 When you are on the phone talking to someone, press the flash key to put the call on hold and
get a dial tone.
Step 2 Dial a phone number directly to make another call.
Step 3 When the second call is answered, press the flash key and press "3" to create a three-way
conversation.
Step 4 Hang up the phone to drop the connection.
Step 5 If you want to separate the activated three-way conference into two individual connections
(one is on-line, the other is on hold), press the flash key and press "2".
----End
USA Type Supplementary Phone Services
This section describes how to use supplementary phone services with the USA T
ype Call
Service Mode. Commands for supplementary services are listed in the table below.
After pressing the flash key, if you do not issue the sub-Command before the default sub-
Command time-out (2 seconds) expires or issue an invalid sub-Command, the current
operation will be aborted.
Table 15-7 USA Flash Key Commands
Command SUB- Command Description
Flash - Put a current call on hold to place a second call.
After the second call is successful, press the flash
key again to have a three-way conference call.
Put a current call on hold to answer an incoming
call.
Flash *98# Transfer the call to another phone.
USA Call Hold
Call hold allows you to put a call (A) on hold by pressing the flash key.
L
TE CPE B2368
User Guide
15 VoIP
Issue 03 (2019-01-31) Copyright © Huawei Technologies Co., Ltd. 132
To Next Page
Loading...
