Huawei B2368 - 29 Troubleshooting

Label Description
Status This shows whether or not the SSID is enabled (on).
Security Mode This displays the type of security the LTE Device is using in the
wireless LAN.
WLAN 5G Information
Channel This is the 5 GHz channel number used by the LTE Device now.
WPS Status Configured displays when a wireless client has connected to the L
TE
Device or WPS is enabled and wireless or wireless security settings
have been configured. Unconfigur
ed displays if WPS is disabled or
wireless security settings have not been configured.
Radio Status On displays when the WLAN radio is enabled. Off displays when the
WLAN radio is turned off.
5G SSID (1~4) Information
SSID This is the descriptive name used to identify the LTE Device in the
wireless LAN.
Status This shows whether or not the SSID is enabled (on).
Security Mode This displays the type of security the LTE Device is using in the
wireless LAN.
LTE Status
Status This displays 4G LTE if there is an LTE connection, otherwise, it
displays N/A.
SIM Card Status This displays PIN disable if SIM card needs PIN or PUK to unlock,
it displays PIN required or PUK required.
Signal Strength This displays the strength of the LTE connection that the LTE Device
has with the base station which is also known as eNodeB or eNB.
Service Provider This displays the service provider's name of the connected LTE
Network.
Frequency Band This displays the LTE band if there is an LTE connection, otherwise,
it displays N/A.
Connection
Uptime
This displays how long the LTE connection has been available since
it was last established successfully.
RSRP This displays the RSRP strength of the L
TE connection that the LTE
Device has with the base station which is also known as eNodeB or
eNB.
SINR This displays the SINR strength of the LTE connection that the LTE
Device has with the base station which is also known as eNodeB or
eNB.
LTE CPE B2368
User Guide
3 Connection Status and System Info
Issue 03 (2019-01-31) Copyright © Huawei Technologies Co., Ltd. 25