Label Description
LockMode Select LockBand to set the L
TE Device's L
TE connection to use a
specific LTE band. Then select the LTE band on the right.
Select LockDlEarfcn to set the LTE Device's LTE connection to use a
specific downlink frequency. Then select the LTE band and specify the
downlink EARFCN (E-UTRA Absolute Radio Frequency Channel
Number) on the right (0-65535). If you do not want to reselect and
handover, please tick “Disable inter-frequency reselect or handover”
Select LockCell to set the LTE Device's LTE connection to use a
specific cell tower. Then select the LTE band, specify the downlink
EARFCN (0-65535), and specify the cell tower's PCI (Physical Cell
Identifier) on the right (0-503).
Apply Click this to save your changes and to apply them to the LTE Device.
Cancel Click this to set every field in this screen to its last-saved value.
LTE CPE B2368
User Guide
4 Broadband
Issue 03 (2019-01-31) Copyright © Huawei Technologies Co., Ltd. 35
To Next Page
Loading...
