Huawei FusionModule5000 Product Description

FusionModule5000 Smart Modular Data Center
Product Description (ECC800)
98
Item
Specifications
WiFi function
⚫
2.4 GHz frequency, two antennas, supporting eight STA connections,
50 m WiFi coverage (no blockage)
⚫
Support the WPS button
PoE port
One PoE port, complying with IEEE802.3AT, 25.5 W
Reset button
Press and hold down the button for more than 5s to restore the factory
settings of the WiFi converter.
WPS button
Support fast WiFi access by WPS
WPS function: If you choose Advanced settings > WPS connection on the WLAN of the intelligent
device and press the WPS button on the WiFi converter at the same time, the intelligent device will
quickly connect to the WiFi hotspot of the micro-module.
Indicators
Table 3-66 describes the indicators on the WiFi converter.
Table 3-66 WiFi converter indicators
Indicat
or
Col
or
Name
Status
Description
RUN
Gree
n
Running status
indicator
Steady on
The power supply is normal.
Off
The power supply is abnormal.
Blinking at
long intervals
The WiFi converter successfully
registers with the ECC800 and the
software runs properly (the
indicator blinks at 0.5 Hz, on for 1s
and then off for 1s).
Blinking at
short intervals
The WiFi converter fails to register
with the ECC800 or the
communication is disconnected (the
indicator blinks at 4 Hz, on for
0.125s and then off for 0.125s).
ALM
Red
Alarm indicator
Steady on
A system failure alarm is generated.
Off
No system alarm is generated.
WiFi
Gree
n
WiFi status
indicator
Steady on
The WiFi converter is powered on
but there is no data communication.
Blinking
Data communication is in progress.
WPS
Gree
WPS mode
Off
The WPS is normal.

Huawei FusionModule5000 Specifications

General

Brand	Huawei
Model	FusionModule5000
Category	Wireless Router
Language	English