Huawei HG8240 - Page 155

– Profile Name: ONT-HSI
– Vendor ID: HWTC(2011)
– Terminal Type: 245
– Version: V1R002C00-V1R002C01
(4) Configure the working mode of a LAN port.
In the navigation tree, choose LANDevice > LAN Interface 1 > LAN
Interface > LAN Ethernet Configuration 1. Select LAN Ethernet
Configuration 1 and set LAN port two three-port enable to enable (indicating
that LAN 1 works in the Layer 3 mode).
NOTE
l If LAN port two three-port enable is disable, the LAN port works in the Layer 2
mode.
l If LAN port two three-port enable is enable, the LAN port works in the Layer 3
mode.
LAN port two three-port enable is defaulted to disable.
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual 3 Configuration
Issue 04 (2011-01-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-117