(5) Configure parameters of a WAN port.
a. In the navigation tree, choose WAN Device > WAN Device 1 > WAN
Connection. Select WAN Connection, right-click, and choose Add PPP
Connection from the shortcut menu.
b. Select WAN PPP Interface 1 and enter (or select) a proper value.
– WAN Interface Name: ONT-HSI
– WAN Enable: enable
– Connection Type: IP_Routed
– NATEnable: Enable (NAT must be enabled to configure the Internet
access service.)
– Service Type: INTERNET (For configuring the Internet access service,
INTERNET or a combination containing INTERNET needs to be
selected.)
– VLAN ID: 10 (The VLAN ID of the ONT must be the same as the user-
side VLAN ID configured on the OLT.)
– Priority: 1
3 Configuration
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-118 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)
To Next Page
Loading...
