Huawei HG8240 - Page 182

(2) In the right pane, configure parameters of voice user 1 as follows:
– Register User Name: 80001234
– Auth User Name: 80001234@softx3000.huawei.com
– Password: iadtest1
– Associated POTS: 1 (binding port TEL1 on the ONT)
– Select Enable to enable the voice user configuration.
(3) Click Apply to apply the configuration.
(4) In the right pane, click New to add voice user 2, and configure parameters of
voice user 2 as follows:
– Register User Name: 80001235
– Auth User Name: 80001235@softx3000.huawei.com
– Password: iadtest2
– Associated POTS: 2 (binding port TEL2 on the ONT)
– Select Enable to enable the voice user configuration.
(5) Click Apply to apply the configuration.
NOTE
l The parameters of the SIP-based voice user must be consistent with the corresponding
configuration on the softswitch.
l If Associated POTS is 1, port TEL1 on the ONT is bound. If Associated POTS is 2, port TEL2
on the ONT is bound.
5. Save the configuration.
In the navigation tree, choose System Tools > Configuration File. In the right pane,
click Save Configuration to save the configuration.
6. Restart the voice process.
In the navigation tree, choose Status > VoIP Information. In the right pane, click
Restart VoIP.
3 Configuration
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-144 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)