Huawei HG8240 - Page 236

– VLAN ID: 40 (The VLAN ID of the ONT must be the same as the user-side
VLAN ID configured on the OLT.)
– 802.1p: 1
– Bridge Type: PPPoE_Bridged
– Binding options: SSID1
NOTE
When you use Wi-Fi access service in the PPPoE mode, if DHCP is used, you need to set
Bridge Type to IP_Bridged and enable the DHCP relay function. For procedure details, see
5.3.3 DHCP Server Configuration.
(3) Click Apply to apply the configuration.
3. Save the configuration.
Choose System Tools > Configuration File from the navigation tree. In the right
pane, click Save Configuration.
4. Check the ONT connection status.
In the navigation tree, choose Status > WAN Information. In the right pane, User
Status is Connected.
3 Configuration
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-198 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)