NOTE
l If the WAN interface obtains IP addresses in static or DHCP mode, choose WANIPConnection to
set the parameters of the WAN interface.
l If the WAN interface obtains IP addresses in PPPoE mode, choose WANPPPConnection to set the
parameters of the WAN interface.
Step 5 Bind a LAN port.
Choose 1X_HW_LANBIND from the navigation tree. In the right pane, set Lan1Enable to 1
to bind the WAN interface to LAN port 1.
3 Configuration
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-210 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)
To Next Page
Loading...
