Huawei HG8240 - Page 67

– Service Profile: FTTx (click next to Service Profile and select the
service profile named FTTx in the dialog box that is displayed)
– Authentication Mode: SN
– Terminal Type: 245
– Software Version: V1R002C00 (or V1R002C01)
(6) Click OK.
l Configure the Internet service.
The prerequisite for performing operations in the navigation tree is to navigate to the NE
Explorer of the OLT. To navigate to the NE Explorer of the OLT, do as follows: In the
Main Topology, double-click the required OLT in the Physical Root navigation tree; or
right-click the required OLT and choose NE Explorer from the shortcut menu.
1. Configure a service VLAN on the OLT side.
A service VLAN is the VLAN used for the Internet service.
(1) Choose VLAN from the navigation tree.
(2) On the VLAN tab page, right-click and choose Add from the shortcut menu.
(3) In the dialog box that is displayed, set the parameters.
– VLAN ID: 100
– Type: Smart VLAN
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual 3 Configuration
Issue 04 (2011-01-12) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3-29