Huawei HG8240 - Page 68

(4) Click Next. Click the Upstream Port tab and add upstream port 0/19/0 as the
upstream port of the VLAN.
(5) Click Done.
2. Add a service virtual port on the OLT side.
(1) On the VLAN tab page, select the record where VLAN ID is set to 100 and click
the ServicePort tab in the lower pane.
(2) In the information list, right-click and choose Add from the shortcut menu.
(3) In the dialog box that is displayed, set the parameters.
– Name: HSI
– VLAN ID: 100 (SVLAN ID)
– Connection Type: LAN-GPON (when the physical port is a GPON port) or
LAN-EPON (when the physical port is an EPON port)
– Interface Selection: 0/2/1/0/0 (when the connection type is LAN-GPON) or
0/2/1/0 (when the connection type is LAN-EPON)
– Service Type: Multi-Service VLAN
– User VLAN: 10
– Keep the upstream and downstream settings the same: selected
3 Configuration
EchoLife HG8240/HG8245/HG8247 GPON Terminal
Service Manual
3-30 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Issue 04 (2011-01-12)