Huawei PV+ESS+Charger Solution

To Next Page

To Previous Page

– Cables stored at subzero temperatures must be stored at room

temper

ature for at least 24 hours before they are laid out.

● Do not perform any improper operations, for example, dropping cables

directly from a vehicle. Otherwise, the cable performance may deteriorate due

to cable damage, which aects the current-carrying capacity and temperature

rise.

ESD

NO TICE

The static electricity generated by human bodies may damage the electrostatic-

sensit

ive components on boards, for example, the large-scale integrated (LSI)

circuits.

● When touching the equipment and handling boards, modules with exposed

cir

cuit boards, or application-specic integrated circuits (ASICs), observe ESD

otection regulations and wear ESD clothing and ESD gloves or a well-

grounded ESD wrist strap.

Figure 1-1 Wearing an ESD wrist strap

● When holding a board or a module with exposed circuit boards, hold its edge

without touching any c

omponents. Do not touch the components with bare

hands.

● Package boards or modules with ESD packaging materials before storing or

transporting them.

PV+ESS+Charger Solution

User Manual 1 Safety Information

Huawei PV+ESS+Charger Solution - Page 13