Huawei PV+ESS+Charger Solution

To Next Page

To Previous Page

● After installing the equipment, remove the packing materials such as cartons,

oam, plastics, and cable ties from the equipment area.

1.4 Mechanical Safety

D ANGER

When working at heights, wear a safety helmet and safety harness or waist belt

and f

asten it to a solid structure. Do not mount it on an insecure moveable object

or metal object with sharp edges. Make sure that the hooks will not slide o.

WARNING

Ensure that all necessary tools are ready and inspected by a professional

ganization. Do not use tools that have signs of scratches or fail to pass the

inspection or whose inspection validity period has expired. Ensure that the tools

are secure and not overloaded.

WARNING

Do not drill holes into the equipment. Doing so may aect the sealing

perf

ormance and electromagnetic containment of the equipment and damage

components or cables inside. Metal shavings from drilling may short-circuit boards

inside the equipment.

General Requirements

●

Repaint any paint scratches caused during equipment transportation or

installation in a timely manner. Equipment with scratches cannot be exposed

for an extended period of time.

● Do not perform operations such as arc welding and cutting on the equipment

without evaluation by the Company.

● Do not install other devices on the top of the equipment without evaluation

by the Company.

● When performing operations over the top of the equipment, take measures to

protect the equipment against damage.

● Use correct tools and operate them in the correct way.

Moving Heavy Objects

● Be cautious to prevent injury when moving heavy objects.

PV+ESS+Charger Solution

User Manual 1 Safety Information

Huawei PV+ESS+Charger Solution - Mechanical Safety