Huawei PV+ESS+Charger Solution - Scheduled Charging

Precautions
●
To use plug-and-play charging, disable the identity authentication by referring
to Identity Authentication which may result in unauthorized charging.
● You can also lock the charging connector to the charger if the property safety
is ensured. In this way, you only need to insert the charging connector to your
vehicle to start a charging session. For details, see Lock Charging Connector.
Starting Charging
Insert the charging connector completely into the charger and the charging port
of a vehicle. If the indicator on the charger turns blue on and o cyclically (on for
0.5s and o for 0.5s), the charger is in the charging state.
Stopping Char
ging
After the vehicle is fully charged, the charger automatically stops charging. In this
case, the indicator is steady blue. You can also touch and hold
on the app
or swipe the RFID car
d in the swiping area to stop charging.
NO TE
To use plug-and-play charging, do not set scheduled charging. Otherwise, the charger
enters the scheduled char
ging waiting state after the charging connector is inserted into
the charging port of a vehicle.
4.5.2 Scheduled Charging
Charging Procedure
1. On the charger screen, tap Scheduled Charging.
2. Tap Schedule. If the indicator on the charger turns blue on and o cyclically
(pulsat
ing blue for 4s and o for 1s), the charger has entered the scheduled
charging waiting state.
PV+ESS+Charger Solution
User Manual 4 System Commissioning
Issue 02 (2023-01-13) Copyright © Huawei Technologies Co., Ltd. 53