Huawei PV+ESS+Charger Solution - Using a Charger (Owner); Plug-And-Play Charging

Figure 4-11 Adding a devic
e
PV+Charger/PV+ESS+Charger Devices Under Dierent Installers
●
If a PV or ESS device is added to the charger, installer A has bound the
charger to a plant, and installer B adds the PV device, the charger needs to be
unbound from the original plant and connected to the new PV plant created
by installer B.
● If a charger is added to a PV+ESS plant and installer A does not bind the
charger to the plant after commissioning, installer A can send the charger SN
or QR code to installer B who connects the charger to the existing PV+ESS
plant.
4.5 Using a Charger (Owner)
The FusionSolar app can connect to chargers. You can use the app to charge a
vehicle, set the charging power, and charge with PV power.
4.5.1 Plug-and-Play Charging
After the charging connector is inserted into the charging port of a vehicle, the
charger automatically starts and stops charging.
PV+ESS+Charger Solution
User Manual 4 System Commissioning
Issue 02 (2023-01-13) Copyright © Huawei Technologies Co., Ltd. 52