1.3 Environment Requirements
Do not expose the equipment to ammable or explosive gas or smoke. Do not
perf
orm any operation on the equipment in such environments.
Do not store any ammable or explosive materials in the equipment area.
Do not place the equipment near heat sources or re sources, such as smoke,
candles, heaters, or other heat
ing devices. Overheat may damage the equipment
or cause a re.
Install the equipment in an area far away from liquids. Do not install it under
ar
eas prone to condensation, such as under water pipes and air exhaust vents, or
areas prone to water leakage, such as air conditioner vents, ventilation vents, or
feeder windows of the equipment room. Ensure that no liquid enters the
equipment to prevent faults or short circuits.
To prevent damage or re due to high temperature, ensure that the ventilation
v
ents or heat dissipation systems are not obstructed or covered by other objects
while the equipment is running.
General Requirements
●
Ensure that the equipment is stored in a clean, dry, and well ventilated area
with proper temperature and humidity and is protected from dust and
condensation.
● Do not install or run the equipment beyond the technical specications.
Otherwise, its performance and safety will be compromised.
●
Do not install, use, or operate outdoor equipment and cables (including but
not limited to moving equipment, operating equipment and cables, inserting
connectors to or removing connectors from signal ports connected to outdoor
facilities, working at heights, performing outdoor installation, and opening
PV+ESS+Charger Solution
User Manual 1 Safety Information
Issue 02 (2023-01-13) Copyright © Huawei Technologies Co., Ltd. 8
To Next Page
Loading...
