Table 3-172 Major differences between 32-channel ADSL SPL boards
Board Port Impedance Applicable
Line
Applicable
Service Board
H801SPLF 600-ohm impedance POTS
l H805ADLF
l H808ADLF
H801SPLH 2B1Q or 4B3T ISDN H808ADIF
H801SPLL Complex impedance (ETSI TS 101 952
01 01 option A)
POTS
l H805ADLF
l H808ADLF
Differences Between 64-channel ADSL SPL Boards
By the front panel appearance, 64-channel ADSL SPL boards can be classified into two types:
boards with common front panel and boards with embedded front panel. These two types of
boards are applicable to different subracks and use different cables. Therefore, they cannot be
used together.
NOTE
l Ports on the board with common front panel (from top to bottom): xDSL0, xDSL1, LINE1, LINE0,
PSTN1, and PSTN0
l Ports on the board with embedded front panel (from top to bottom): xDSL1, xDSL0, LINE0, LINE1,
PSTN0, and PSTN1
Figure 3-146 shows the appearance difference between 64-channel ADSL SPL boards.
Figure 3-146 Appearance of the board with common front panel and board with embedded
front panel
Table 3-173 lists the major differences between 64-channel ADSL SPL boards.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
3 Board
Issue 24 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
766