Package Contents
After unpacking the inverter, check that the contents are intact and complete. If
any damage is found or any component is missing, contact your supplier.
For details about the number of contents, see the
Packing List
in the packing case.
4.2 Tool Preparation
Category Tool
Installation
Hammer drill
(with Ф14 mm
and Ф16 mm
drill bits)
Socket wrench
set
Torque wrench Torque
screwdriver
(Phillips head:
M4;
at head:
M4)
Diagonal pliers Wire stripper Flat-head
screwdriver
(head: 0.6 mm x
3.5 mm)
Rubber mallet
Utility knife Cable cutter Crimping tool
(model:
UTXTC0003;
manufacturer:
Amphenol)
RJ45 crimping
tool
SUN2000-(90KTL, 95KTL, 100KTL, 105KTL) Series
User Manual
4 Installation
Issue 11 (2020-08-30) Copyright © Huawei Technologies Co., Ltd. 26
To Next Page
Loading...
Need help?
General