Procedure
Step 1 Lift the SUN2000 from the packing case and move it to the installation position.
Figure 4-12 Taking out the SUN2000
Step 2 For the SUN2000-90KTL-H2 used in Australia, install the delivered screw for
locking each DC switch.
Figure 4-13 Installing screws
Step 3 Lift the SUN2000 and keep it upright.
SUN2000-(90KTL, 95KTL, 100KTL, 105KTL) Series
User Manual
4 Installation
Issue 11 (2020-08-30) Copyright © Huawei Technologies Co., Ltd. 36
To Next Page
Loading...
Need help?
General