Figure 7-13 Power adjustment parameters
Table 7-7 Power adjustment parameters
Parameter Description
Remote power schedule If this parameter is set to Enable, the inverter responds to
the scheduling instruction from the remote port. If this
parameter is set to Disable, the inverter does not respond to
the scheduling instruction from the remote port.
Schedule instruction valid
duration (s)
Species the time for maintaining the scheduling instruction.
When this parameter is set to 0, the scheduling instruction
takes eect permanently.
SUN2000-(90KTL, 95KTL, 100KTL, 105KTL) Series
User Manual
7 Man-Machine Interactions
Issue 11 (2020-08-30) Copyright © Huawei Technologies Co., Ltd. 86
To Next Page
Loading...
Need help?
General