Huawei SUN2000L Series - App Operations by the User; Logging in to the App

SUN2000L-(4.125KTL, 4.95KTL)-JP
User Manual
7 Operations on the Local FusionHome App
Issue 03 (2018-04-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
107
7.5 App Operations by the User
7.5.1 Logging In to the App
Prerequisites

You have logged in as installer and followed the instructions on the Quick setting
screen.

The corresponding SUN2000L is displayed on the Inverter list screen.
Procedure
Step 1 On the Inverter list screen, tap the corresponding SUN2000L, select user, enter the password,
and log in to the app.

The name of the connected SUN2000L is represented by its serial number (SN), which is available
on the SN label attached to the side of the SUN2000L.

The login password is the same as that for the SUN2000L connected to the app and is used only
when the SUN2000L connects to the app.

The initial password is 00000a. Use the initial password upon first login. Use the initial password
upon first power-on and change it immediately after login. To ensure account security, change the
password periodically and keep the new password in mind. Not changing the initial password may
cause password disclosure. A password left unchanged for a long period of time may be stolen or
cracked. If a password is lost, devices cannot be accessed. In these cases, the user is liable for any
loss caused to the PV plant.

If you enter wrong passwords for five consecutive times and the interval between two consecutive
passwords is within 2 minutes, your account will be locked out for 5 minutes.
Figure 7-43 Identity verification
Step 2 If you log in successfully, the home screen is displayed.