Huawei SUN2000L Series - Setting Protection Parameters

SUN2000L-(4.125KTL, 4.95KTL)-JP
User Manual
7 Operations on the Local FusionHome App
Issue 03 (2018-04-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
88
Figure 7-29 Grid parameters
Table 7-1 Description of grid parameters
Parameter
Description
Value Range
Grid code
Set this parameter based on
the grid code of the country
or region where the
SUN2000L is used and the
SUN2000L application
scenario.
For details of the grid codes,
see A Grid Codes.
The default value varies
depending on the model.
The displayed value
prevails.
Output mode

Single-phase

Split-phase

Dual–live wire
Auto start up on grid
recovery
Specifies whether the
SUN2000L can start
automatically when the
power grid recovers.

Disable

Enable
The grid parameter values vary with grid codes. The displayed values prevail.
7.4.5.2 Setting Protection Parameters
To set protection parameters, choose Grid-connect config > Expert mode > Protection
parameters from the Operation console screen.