Huawei SUN2000L Series - 7.4 App Operations by the Installer; 7.4.1 Logging In to the App

SUN2000L-(4.125KTL, 4.95KTL)-JP
User Manual
6 System Commissioning
Issue 03 (2018-04-11)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
66
LCD
Operation Procedure
5. Press , select NetEco, and press .
6. Set NetEco parameters, and then press .
NOTE
In most cases, set Address mode to Comm. Addr..
If the devices connected to the three RS485 ports of
the SmartLogger1000 have duplicate addresses,
you must set Address mode to Logical addr..
----End