SUN2000L-(4.125KTL, 4.95KTL)-JP
User Manual
7 Operations on the Local FusionHome App
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
The initial password is 00000a. Use the initial password upon first login. Use the initial password
upon first power-on and change it immediately after login. To ensure account security, change the
password periodically and keep the new password in mind. Not changing the initial password may
cause password disclosure. A password left unchanged for a long period of time may be stolen or
cracked. If a password is lost, devices cannot be accessed. In these cases, the user is liable for any
loss caused to the PV plant.
If you enter wrong passwords for five consecutive times and the interval between two consecutive
passwords is within 2 minutes, your account will be locked out for 5 minutes.
Figure 7-10 Identity authentication
Step 2 If you log in successfully, the Quick setting or Operation console screen is displayed.
The Quick setting screen is displayed only when the SUN2000L connects to the app for the first
time or the factory defaults of the SUN2000L are restored.
If you do not follow the deployment wizard, the Quick setting screen is still displayed when you log
in next time.
To exit the deployment, press the Back button on the mobile phone or tap Exit on the screen. To
enter the Quick setting screen again, choose Quick setting from the Operation console screen.
The Quick setting screen provides two deployment modes. Select either of them based on site
requirements.
Method 1: quick setting
To Next Page
Loading...
