HUBBELL LIGHTING CX User Manual

1
PRECAUTIONS
• READ AND FOLLOW ALL SAFETY INSTRUCTIONS.
• No components in the CX Panel should be removed while power is still being supplied to the CX Transformer. This will result
in Panel failure and the entire CX Panel and components will need to be replaced. This is an unsupported action and voids
Warranty.
• CAUTION - RISK OF ELECTRICAL SHOCK. To prevent electrical shock, turn off power at the circuit breaker before installing
or servicing unit. Never wire energized electrical components.
• NOTICE: For installation by a licensed electrician in accordance with National and/or local Electrical Codes and the following
instructions.
• CAUTION: USE COPPER CONDUCTOR ONLY.
• Be sure to read and understand all instructions before installing or servicing unit
• Do not operate unit with panel door assembly or relay guard covers removed.
• For Indoor use only. Do not use outdoors.
• Do not mount near gas or electric heaters.
• Disconnect switch or a circuit breaker must be provided and marked as the disconnecting device.
• The use of accessory equipment not recommended by the manufacturer may cause an unsafe condition.
• Conrm that device ratings are suitable for application prior to installation.
• No user serviceable parts contained inside unit. Refer all service related questions to the factory. All servicing shall be
performed by qualied service personnel.
• Equipment should be mounted in locations and at heights where it will not readily be subjected to tampering by unauthorized
personnel.
• Use only approved materials and components (i.e. twist on connectors, electrical box, etc.) as appropriate for installation.
• NOTICE: Do not install if product appears to be damaged.
• If the equipment is used in a manner not specied by the manufacturer, the protection provided by the equipment may be
impaired.
• Do not use this equipment for other than intended use.
SAVE THESE INSTRUCTIONS!
CX Lighting Control Panel
Users’ Guide

HUBBELL LIGHTING CX Specifications

General

Brand	HUBBELL LIGHTING
Model	CX
Category	Control Panel
Language	English

Summary

CX Lighting Control Panel Safety Precautions

General Safety Warnings and Cautions

Important safety instructions, warnings, and cautions for installation and operation.

Part 1: CX Lighting Control Panels Installation Guide

Installation Instructions Overview

Covers panel description, product configuration, enclosure mounting, wiring, and operation.

Panel Specifications and Connections

Details panel specifications, relay ratings, low voltage inputs, and connection procedures.

Part 2: CX Lighting Control Panels Programming Guide

User Interface and Navigation

Describes the panel's display, keypad, navigation keys, and menu structure for programming.

System Settings Configuration

Configuration of date/time, panel names, schedules, inputs, outputs, and relay functions.

Scenarios, Groups, and Schedules

Setting up control schemes, grouping relays, and programming timed events and holiday schedules.

Input/Output Mapping and Dimming Control

Mapping inputs/outputs, configuring photocells, and setting up dimming functionality for lighting control.

System Tools, Priorities, and Masking

Utilizing system tools, managing dimming, access control, priorities, and masking for advanced logic.

Part 3: CX Lighting Control Panels Troubleshooting and Configuration

Troubleshooting Common Issues

Diagnosing problems with power, inputs, components, and master/secondary configurations.

Hardware Configuration: Dipswitches and Settings

Details dipswitch settings for motherboards and dimming cards for proper panel configuration.