Humminbird ONIX User Manual

81
Waypoints
WAYPOINTS
W
aypoints are saved latitude/longitude positions. They mark a position of interest such as your favorite fishing area,
s
tructure, or marker buoy. The control head saves the position and allows you to edit the waypoint name, icon, and more
(
see Manage your Navigation Data). You can save 5000 waypoints to the control head.
Mark Waypoints
Cross Touch allows you to mark waypoints using the touch screen or the keypad. Waypoints can be marked at the vessel position
or cursor position. To edit the waypoint, see Edit a Waypoint in the Chart View or Manage your Navigation Data. To display waypoints
on the chart as they are marked, see Change the Chart View Overlays.
Mark a Waypoint at the Vessel Position
Mark a Waypoint at the Cursor Position
Touch Screen
1. Press and hold a position on the Chart View.
2. Select Waypoint.
Keypad
1. Use the Joystick to move the cursor to a position on
the chart.
2. Press the MARK key twice.
Touch Screen
1. Tap Chart in the status bar.
2. Select Mark.
3. Select Waypoint.
Keypad
1. Press the MARK key twice.

Humminbird ONIX Specifications

General

Networking	Ethernet
Waterproof Rating	IPX7
Waypoints	3000
Power Output	500W (RMS)
Frequency	50/83/200 kHz
GPS Receiver	Internal