EasyManua.ls Logo

Hunter TCX50 - Page 10

Hunter TCX50
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation Instructions for TCX50 Tire Charger
10
2. Overinated tires can explode, producing hazardous ying debris that may result in an
accident.
3. Tires and Rims that are not the same diameter are “mismatched.” Never attempt to mount
or inate any tire and rim that are mismatched. For example, never mount a 16.5” tire on
a 16” rim and vice versa. This is very dangerous. A mismatched tire and rim could explode
and result in an accident.
4. Never exceed the bead setting pressure (gauge on hose) provided by the tire
manufacturer, as stated on the sidewall of the tire.
5. Never place your head or any part of your body over a tire during the ination process or
when attempting to seat beads. This machine is not intended to be a restraining device for
exploding tires, tubes or rims.
6. Never use an ination source other than the regulated pressure system on the tire changer.
7. Use a safety cage in accordance with tire manufactures recommendations if ination
pressures beyond the tire changer equipped regulated air is required.
An exploding tire and rim may be propelled upward and outward with enough force
to cause serious injury or death.
Never mount any tire unless the tire size (molded into the sidewall) matches the rim
size (stamped into the rim) exactly or if the rim or tire are defective or damaged.
Never exceed tire pressure recommended by tire manufacturer.
This tire changer is not a safety device and will not restrain exploding tires and rims.
keep area clear of bystanders.
DANGER
8. Crushing Hazard. Moving Parts Present. Contact with moving parts could result in an
accident.
• Only one operator may work with the machine at a
time.
• Keep all bystanders clear of tire changer.
• Keep hands and ngers clear of rim edge during
demounting and mounting process.
• Keep hands and ngers clear of mount/demount
head during operation.
• Keep hands and other body parts away from moving
parts.
• Do not use tools other than those supplied with tire
changer.
• Use proper tire lubricate to prevent tire binding.
Avoid Personal Injury. Carefully read, understand and follow the warnings and
instructions given in this manual. This manual is an essential part of the product.
Keep it with the machine in a safe place for future reference.
WARNING

Table of Contents

Related product manuals