Hunter TCX50 - Mounting Standard Tire to Rim

Operation Instructions for TCX50 Tire Charger
38
Never mount a tire to a rim that is not the same diameter (e.g., 16 1/2 inch tire
mounting on a 16 inch rim).
WARNING
WARNING
Never inate using “shop air” on the tire changer.
Use a safety cage in accordance with tire manufactures recommendations if ination
pressures beyond the tire changer equipped regulated air is required.
If tire is over-inated, air may be removed from the tire by pressing the brass manual air
release button located below the air pressure gauge.
Disconnect ination hose from valve stem.
2.6 Removal of Wheel from Tire Changer
Lift the clamping pedal to release the rim from the clamping device.