Operation Instructions for TCX50 Tire Charger
20
1.16 Mount / Demount Head
• MOVING PARTS PRESENT.
MOVING PARTS CAN CUT AND CRUSH.
• Keep hands away from moving parts.
• Crush may cause injury.
WARNING
The mount/demount head is suspended from the column above the turntable.
The head has a mounting and demounting lip that is designed to install or remove the bead of
tire as the wheel is rotated clockwise.
A. Standard version
MOUNTING
LIP
The
mounting lip
is on the left
side of the
head.
STEEL MOUNT
HEAD
PLASTIC
MOUNT HEAD
DEMOUNTING
LIP
The
demounting lip
is on the right
side of the
head.
B. Leverless version
AUTOMATIC LEVER
RETRACTED
AUTOMATIC LEVER
EXTENDED
MOUNTING
LIP
The
mounting lip
is on the left
side of the
head.
DEMOUNTING
LIP
The
demounting lip
is on the right
side of the
head.
AUTOMATIC
LEVER
In addition, the head also incorporates an automatic lever to ease the demounting process.
The bead of tire is placed on top of mounting lip during mounting.
The bead of tire is placed on top of demounting lip during demounting.
To Next Page
Loading...
