Operation Instructions for TCX50 Tire Charger
17
Never allow any bystander to be within 20 feet of the machine during operation.
To stop the machine in an emergency:
• disconnect the power supply plug;
• cut off the compressed air supply network by disconnecting the shut-off valve (snap
coupling).
1.9 Control Pedal Congurations
Avoid unintended machine movement and personal injury.
Pay close attention to the conguration of your machine.
WARNING
Throughout this manual, control pedals are referred to by the associated symbol.
The PowerOut system provides bead breaking controls on the handle for convenience,
particularly with larger diameter assemblies.
1.10 Wheel Rotation Pedal
Step down on the rotation pedal to rotate the wheel clockwise.
Lift up on the pedal to rotate the wheel counterclockwise.
1.11 Tire Bead Breaker Shovel control
Keep arms and legs from between the bead breaker arm and the side of the housing.
WARNING
4-402023
CRUSH HAZARD CRUSH HAZARD
EXPLOSION HAZARD
To Next Page
Loading...
