Hunter TCX50 - Electrical Indications

Operation Instructions for TCX50 Tire Charger
13
No. Part Number Description
1 RP11-4-402025 DECAL-PEDAL OPERATION
2 RP11-4-402030 DECAL-INFLATRON PEDAL OPERATION
3
128-1484-2 DECAL-HUNTER LOGO TCX50
128-1485-2 DECAL-HUNTER LOGO TCX51
128-1486-2 DECAL-HUNTER LOGO TCX53
4 RP11-4-402021 DECAL-MANUAL TIRE BLEED VALVE
5 RP11-4-115244 DECAL-DANGER OPERATION
6 RP11-4-115243 DECAL-WARNING OPERATION
7 RP11-4-402027 DECAL-MAXIMUM INLET PRESSURE
8 RP11-3020842 DECAL-TABLE ROTATION
9 RP11-4-402023 DECAL-RIM, TABLE, BEAD, BREAKER, BEAD AIR PRESSURE
10 RIF. SN DECAL-MODEL SERIAL NUMBER
11 RP11-4-402031 DECAL-VERTICAL COLUMN LOCK LEVER OPERATION
12 RP11-4-115246 DECAL-ELECTRICAL HAZARD
13 RP11-4-115245 DECAL-WARNING INDICATION
14 RP11-4-113552 DECAL-TL TOOL LABEL
15 RP11-4-407099 DECAL-LABEL TOOL MOVEMENT
16 RP11-3013640 DECAL-ARROWS LEFT-RIGHT
17 RIF. SN DECAL-ETL LISTING MARK
18 RP11-4-136333 DECAL-WARNING INDICATION
19 RP11-4-136661 DECAL-ELECTRICAL HAZARD
20 RP11-4-136662 DECAL-WARNING LUBRICANT OIL
21 RP11-4-136663 DECAL-WARNING SOCKET-OUTLET
Electrical Indications
The TCX50 family is manufactured to operate at a specic voltage and amperage rating.
Make sure that the appropriate electrical supply circuit is of the same voltage and amperage
ratings as marked on the TCX50.
FIRE HAZARD. DO NOT ALTER THE ELECTRICAL PLUG.
WARNING
Plugging the electrical plug into an unsuitable supply circuit will damage the
equipment.
NOTICE
• HAZARDOUS VOLTAGE
• Turn off and lock out system power before
servicing.
• Contact may cause electric shock or death.
DANGER