Hunter TCX50 - Advanced Demounting Procedures; TCX51 Operational Supplement; BP Arm Operation

Operation Instructions for TCX50 Tire Charger
48
4. TCX51 Operational Supplement
BP Arm Operation
4.1 General Information
This chapter contains information for the correct use of the optional BP Bead Press Arm.
The BP Bead Press Arm has been designed as an accessory to help the operator mount the
tire on the rim, or to demount the tire from the rim.
4.2 Part Identication
The functional parts of the BP Bead Press Arm are:
1
2
4
3
5
1. Arm
2. Bead Press Head w/hook
3. Control Switch
4. Air Cylinder
5. Bead Press Roller (BPR)