Hunter TCX50 - Difficult Tires

Operation Instructions for TCX50 Tire Charger
34
MOUNT HEAD CORRECTLY
PLACED
MOUNT HEAD INCORRECTLY
PLACED
Position the tire such that the back of the tire is over the mount / demount head and the front
of the tire under the nger of the mount / demount head.
BACK OF TIRE OVER MOUNT /
DEMOUNT HEAD
FRONT OF TIRE UNDER MOUNT /
DEMOUNT HEAD FINGER
Difcult tires
In cases where the sidewall is too strong, this operation could be difcult. In this case use the
BPS or BP arm.
If equipped, move the articulated arm of the BPS (or BP arm) to the 3 o’clock position and
lower the upper bead press disc down onto the edge of the tire.
With the tire in position, press the wheel rotation pedal to rotate the wheel clockwise and
mount the top bead.