HunterDouglas Applause - Advanced Operation and Programming

Operation
16
Top-Down/Bottom-Up and Duolite
™
Operation
1. Press ▼ CLOSE to lower the bottom rail, closing the shade.
2. Press the left arrow to lower the middle rail. This opens the shade top-down on a Top-
Down/Bottom-Up shade or covers the window with the top fabric panel on a Duolite
™
shade. (If the bottom rail is not fully lowered, pressing this button will lower the bottom
rail first then lower the middle rail.)
3. Press the right arrow to raise the middle rail. This closes the shade bottom-up on a
Top-Down/Bottom-Up shade or covers the window with the bottom fabric panel on a
Duolite shade.
4. Press ▲ OPEN to raise the bottom rail, opening the shade bottom-up. (If the middle rail is
not fully raised, pressing this button will raise the middle rail first then raise the bottom
rail.)
5. Press ■ STOP to stop shade movement anywhere along the shade’s travel.
Further Operation and Programming Information
PowerView
™
Pebble
™
Remote and/or PowerView Surface Remote Operation
For information regarding operation and programming of the PowerView remote, refer to your
PowerView Motorization Remote Control Guide.
PowerView Scene Controller
For information regarding operation and programming of the PowerView Scene Controller,
refer to your PowerView Motorization Scene Controller Guide.
PowerView App Operation
PowerView Hub is required for PowerView App operation. For information regarding setup and
operation using the PowerView App, refer to the online PowerView App Software Guide at
hunterdouglas.com/powerview/support.