HunterDouglas Applause - End Mount Bracket Installation; Mount Installation Brackets - End Mount

Installation
8
MOUNT THE INSTALLATION BRACKETS — ENDMOUNT
End mount the headrail when conventional mounting techniques will not work — for example,
in an arched window opening.
■
Position the end mount brackets so that the top of
the attached installation brackets is at the ordered
height of the shade.
CAUTION: Both brackets must be installed at the
same depth and height.
■
Mark both screw holes.
➤
The mounting surface must be vertical and flat,
not part of an archedcurve.
➤
Minimum mounting depth is 1
1
/ 4 ". Minimum
mounting depth for a fullyrecessed end mount
is 2
3
/ 8 ".
■
Drill the holes using a
3
/ 32 " drill bit.
■
Attach the end mount installation brackets
usingthe flat head screwsprovided.
IMPORTANT: Drywall mounting is not
recommended.
IMPORTANT: For instructions on installing an
arch over a rectangular shade, see the Installation,
Operation, and Care instructions that came with
your arch shade.
Proceed to “STEP 2 — Install the Shade” on page 9.
1
1
/ 4 "
Minimum
Ordered
Shade
Height
1
1
/ 4 "
Minimum
Ordered
Shade
Height