HunterDouglas Applause - Bracket Installation with Spacers; Attach Brackets with Spacer Blocks and Extensions

Installation
7
■
Attach the installation or extension brackets using the screws provided.
IMPORTANT: The front edges of the installation brackets must be level and aligned to
each other.
■
If using spacer blocks for added clearance, the spacer blocks
and shims may be stacked.
➤
A maximum of 1
1
/ 2 " of added clearance using spacer blocks
and shims is recommended.
■
Attach the spacer blocks and installation brackets to
a flat vertical mounting surface with #6mounting
screws long enough for asecure installation.
➤
The top of the spacer blocks should be at the
desired shade height.
IMPORTANT: The front edges of the installation
brackets must be level and aligned to each other.
CAUTION: Use drywall anchors when mounting
into drywall.
■
If using extension brackets, attach an installation
bracket to the underside of each extension bracket
using theprovided screws and speed nuts.
Proceed to “STEP 2 — Install the Shade” on page 9.
Longer Screw
(Not Provided)
Maximum
1
1
/ 2 "