Operation
18
LEVEL THE BOTTOM RAIL (IF NECESSARY)
■
Lift the bottom rail to locate the pockets on the underside
of the rail.
■
Gently pull down on the bottom rail to fully insert the
7
/
64
"
Allen wrench key into the pocket. The key is fully
inserted when the ring on the key abuts to the pocket.
➤
Lift up the bottom rail slightly before turning the
Allen wrench key. Turn the key clockwise to raise
that side of the bottom rail, or counter-clockwise to
lower it.
➤
One quarter turn of the key equals approximately
1
/
4
".
IMPORTANT: The Allen wrench key must be fully
inserted to avoid stripping the mechanism. Do not pull
down on the bottom rail while turning the key.
■
If more than two pockets exist, adjust the outer pockets first. Then adjust inner pockets
as necessary, to maintain equal tension across the bottom rail. As pocket adjustments are
made, it is recommended that the shade be raised and lowered to check that it is level.
Pocket
Underside of Bottom Rail
Allen Wrench Key
Lower
Raise
To Next Page
Loading...
