2
Getting Started
Thank you for purchasing Hunter Douglas Applause
®
honeycomb shades with PowerView
™
Motorization. With proper installation, operation, and care, your new shades will provide
years of beauty and performance.
Please thoroughly review this instruction booklet and the enclosed packing list before
beginning the installation. If your shade has a protective plastic cover on the fabric-covered
headrail, keep the plastic in place until the shade is installed.
TOOLS AND FASTENERS NEEDED
■
Flat blade and Phillips screwdrivers
■
Level (laser level is recommended)
■
Measuring tape and pencil
■
Power drill,
3
/
32
" drill bit, and
1
/
4
" hex driver
In addition, you will need fasteners designed to work with your specific mounting surface(s).
■
#6 Hex Head Screws (Provided). Two 1
1
/
2
" screws are provided per installation bracket.
■
Longer #6 Hex Head Screws (Not Provided). If using spacer blocks, use #6 screws long
enough for a secure attachment.
■
#6 Flat Head Screws (Provided). If end mounting the shade, use two 1
1
/
2
" screws per
installation bracket.
■
Speed Nuts and Screws (Provided). Extension brackets come with speed nuts and
screws.
■
Drywall Anchor (Not Provided). Use drywall anchors when mounting into drywall.
#6 x 1
1
/
2
"
Hex Head Screw
(Provided)
Longer #6 Hex Head Screw
for Use with Spacer Blocks
(Not Provided)
#6 Flat Head Screw
for Use with End Mounts
(Provided)
Speed Nut
and Screw
(Two Provided with
Each Extension Bracket)
To Next Page
Loading...
